哥倫比亞大學機械工程碩士入學條件

2020年哥倫比亞大學機械工程碩士入學條件及哥倫比亞大學機械工程碩士實習就業是申請留學的同學十分關心的話題，下面指南者留學詳細整理2020年哥倫比亞大學機械工程碩士入學條件及實習就業相關信息供大家參考，其中包括2020年哥倫比亞大學機械工程碩士專業中文名、專業英文名、學制、學費、入學時間、授課語言、地理位置、課程領域、申請費、課程介紹、申請材料、課程設置、就業等。

哥倫比亞大學機械工程碩士研究生簡介

專業中文名：機械工程碩士

專業英文名： Master of Mechanical Engineering

學   制：2.00 年

學   費：工程技術學

入學時間：9月

授課語言：英文

授課校區：美國哥倫比亞大學

領   域：工程技術學

申請費：85美元

哥倫比亞大學機械工程碩士專業介紹

美國哥倫比亞大學機械工程碩士課程要求學生完成30學分的課程，不少于十門課程。學生可以選擇論文，可以代替6學分的課程。在一般情況下，完成機械工程碩士并獲得學位需要兩個或三個學期的全日制學習，如非全日制學習需要一個相對較長的時間。 美國哥倫比亞大學機械工程碩士課程要求學生學習一系列的課程，在征詢導師后，學生可以根據自己的喜好和目標選擇自己的專業，我們稱之為標準課程。另外，學生還可以從一組預定的專業選擇，我們成為特殊課程。 典型的標準課程包括固體和流體力學，熱力學，傳熱，制造工程，機器人，運動學，動力學和振動，控制和發電的力學。 The program leading to the Master of Science degree in Mechanical Engineering requires completion of a minimum of 30 points of approved course work consisting of no fewer than ten courses. A thesis based on either experimental, computational, or analytical research is optional and may be counted in lieu of up to 6 points of course work. In general, attainment of the degree requires two or three semesters of full-time study, although it may also be undertaken on a part-time basis over a correspondingly longer period. A minimum grade point average of 2.5 is required for graduation and matriculation. The M.S. degree in Mechanical Engineering requires a student to take a sequence of courses that shows a “clearly discernible specialty or concentration.” In consultation with his/her advisor, an M.S. student can develop a concentration specifically tailored to his/her interests and objectives, and we refer to this as the Standard Track. Alternatively, M.S. students can pick from a set of pre-defined concentrations, or Special Tracks. Typical choices of concentration in the Standard Track include such subjects as mechanics of solids and fluids, thermodynamics, heat transfer, manufacturing engineering, robotics, kinematics, dynamics and vibrations, controls, and power generation. Nevertheless, the following guidelines must be adhered to: 1. The sequence of courses selected must show a clearly discernible specialty or concentration. 2. All courses must be at the graduate level, i.e., numbered 4000 or higher, with a minimum of (6 pts) 6000-level or higher (lecture) courses included. 3. Every program must contain at least one course in mathematics (APMA, MATH, STAT, SIEO course de

哥倫比亞大學機械工程碩士入學條件

美國哥倫比亞大學機械工程碩士課程入學要求： 學術要求： 大學本科畢業，擁有學士學位 語言要求：雅思總分不低于7.5分，托福總分不低于100分 美國哥倫比亞大學機械工程碩士課程申請材料： 畢業證、學位證掃描件 成績單（在校成績、語言成績） 個人陳述 銀行存款證明 翻譯件（所有中文申請材料的翻譯件，并加蓋公章） 2-3封推薦信

哥倫比亞大學機械工程碩士課程設置

美國哥倫比亞大學機械工程碩士課程設置： 能量的來源和轉換，先進的熱力學，渦輪機械，力學和熱力學的推進，太陽能集熱工程，綠色建筑的能源動力，高級流體力學，計算流體力學中的案例研究，燃燒化學或過程，替代能源，可持續設計，環境政治和政策管理，國際能源系統和業務結構，能源效率動力學。 MECE E4210: Energy infrastructure planning MECE E4211: Energy: sources and conversion MECE E4302: Advanced thermodynamics MECE E4304: Turbomachinery MECE E4305: Mechanics and thermodynamics propulsion MECE E4312: Solar thermal engineering MECE E4314: Energy dynamics of green buildings MECE E6100: Advanced mechanics of fluids MECE E6104: Case studies in computational fluid dynamics MECE E6313: Advanced heat transfer APPH E4130: Physics of solar energy EAEE E6126: Carbon sequestration EAEE E6208: Combustion chemistry or processes INTA W4200: Alternative energy resources ARCH A4684: Sustainable design SIPA U4727: Environmental politics and policy management SIPA U6060: International energy systems and business structures SUMA K4260: Dynamics of Energy Efficiency EAEE E4190: Photovoltaic Systems Engineering ELEN E4510: Solar Energy and Smart Grid Power Systems **OTHER MECH ENG REQUIREMENTS: One 3-point research course can be counted towards the concentration if the research is approved by advisor and is energy related. M.S. in Mechanical Engineering with Concentration in Micro/Nanoscale Engineering Advisors: Profs. James Hone and Jeff Kysar The concentration in Micro/Nanoscale Engineering provides the MS candidate with an understanding of engineering challenges and opportunities in micro- and nano-scale systems. The curriculum addresses fundamental issues of mechanics, fluid mechanics, optics, heat transfer, and manufacturing at small size scales. Application areas include MEMS, bio-MEMS, microfluidics, thermal systems, and carbon nanostructures. Requirements: While satisfying the general mechanical engineering requirements, take at least five courses from: MECE E4212: Microelectromechanical systems MECE E4213: bioMEMS MECE E6700: Carbon nanotubes MECE E6710: Nanofabrication laboratory MECE E8990: Small scale Mechanical Behavi

哥倫比亞大學機械工程碩士實習就業

美國哥倫比亞大學機械工程碩士課程就業方向： 畢業生可從事制造工程師、可靠性測試工程師、程序工程師、故障員、運作維護員、質量監控員、工程咨詢員、產品開發設計員、研究所研究員、產品銷售員、技術培訓師、以及機械設計相關行業的管理和行政人員。

預約咨詢